600 Psi Repair Clamp

600 Psi Repair Clamp

600 Psi Repair Clamp Product Features: Standard working pressure is 600 psig, 1000 psig. Fittings are available in longer lengths such as 18", 24" and longer as well as higher working pressures such as 1500 psig or 2000 psig; if higher working pressures or longer length is needed, it...

Send Inquiry
Product Details

600 Psi Repair Clamp

    

Product Features:
Standard working pressure is 600 psig, 1000 psig. Fittings are available in longer lengths such as 18", 24" and longer as well as higher working pressures such as 1500 psig or 2000 psig; if higher working pressures or longer length is needed, it can be designed and built to meet your requirements. Fittings are tested to 1.5 times the recommended working pressure.
Buna-N packing is standard; Viton and Silicone and other materials are available upon request. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special requirements. All the HRC Clamps are tested under 1.5times than design working pressure. The standard material of sealing rubber ring is EPDM and NBR.Other like Fluorine rubber,and silica gel are also available.
Some sizes and lengths not listed are available upon request.

Technical Parameters:

image005.jpg

Hot Tags: 600 psi repair clamp, China, manufacturers, suppliers, factory, low price, buy
Related Products
Inquiry

Copyright © Dalian Zhuhong Mechanical Co.,Ltd All Rights Reserved.