High Pressure Repair Clamp

  • High Pressure Leak Repair Clamps

    High Pressure Leak Repair Clamps

    High Pressure Leak Repair Clamps Product Features: Split Sleeve Repair Clamps are an essential part of our suite of pipeline integrity products. Available in a wide variety of sizes, ratings and arrangements, the clamp product line can be supplied independently or as an...Read More
  • Leak Clamp Temporary Or Permanent Repair 900 PSI

    Leak Clamp Temporary Or Permanent Repair 900 PSI

    Split+Sleeves are repair fittings used to permanently seal leaks caused by corrosion Benefits: Can be used for temporary or permanent repair. Full penetration shell to side bar welds are 100% radiographed. The Split+Sleeve can be seal welded for a permanent repair...Read More
  • OD 2' Oil Pipe Leak Repair Comap 800 Psi

    OD 2' Oil Pipe Leak Repair Comap 800 Psi

    Basic characteristics of the device Clamps have a number of important characteristics that determine the operation features: The working pressure of this connecting element varies from 6 to 10 atmospheres, depending on the model; the maximum temperature at which the device...Read More
  • Carbon Steel Leak Repair Clamp 1000 Psi

    Carbon Steel Leak Repair Clamp 1000 Psi

    Leak Repair Clamps is a device that is used to repair and seal a pipeline containing a leak. This is a permanent method of repair. Locally corroded, damaged and cracked pipes can be repaired with this method. We designs and manufactures of clamps for pipelines. pipeline...Read More
  • Leak Repair Clamps With 1500 Psi

    Leak Repair Clamps With 1500 Psi

    Repair Clamp for pipes is used as an "ambulance" for various damages in pipelines. Thanks to the repair clamps it is also possible to replace a separate section of the pipeline without shutting down the entire water supply system. And although the imposition of such a part on...Read More
  • Hot Tapping Saddle

    Hot Tapping Saddle

    Hot Tapping Saddle Product Features: High pressure Pipe Repair Clamp It also can be made according to other special requirements. All the HRC Clamps are tested under 1.5times than design working pressure. The standard material of sealing rubber ring is EPDM and NBR. Other...Read More
  • 400 Bar Repair Clamp

    400 Bar Repair Clamp

    400 Bar Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special...Read More
  • 10 Mpa Repair Clamp

    10 Mpa Repair Clamp

    10 Mpa Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special...Read More
We're well-known as one of the leading high pressure repair clamp manufacturers and suppliers in China for our quality products and low price. Please feel free to buy quality high pressure repair clamp from our factory.

Copyright © Dalian Zhuhong Mechanical Co.,Ltd All Rights Reserved.