10 Mpa Repair Clamp

10 Mpa Repair Clamp

10 Mpa Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special requirements. All the HRC...

Send InquiryChat Now
Product Details

10 Mpa Repair Clamp

    

Product Features:
High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special requirements. All the HRC Clamps are tested under 1.5times than design working pressure. The standard material of sealing rubber ring is EPDM and NBR. Other like Fluorine rubber, and silica gel are also available.
Standard working pressure is 1000 psig. Fittings are available in longer lengths such as 18", 24" and longer as well as higher working
pressures such as 1500 psig or 2000 psig; if higher working pressures or longer length is needed, it can be designed and built to meet your
requirements. Fittings are tested to 1.5 times the recommended working pressure.
Buna-N packing is standard;
Viton and Silicone and other materials are available upon request.

Options Available:
Marine Trim for corrosion protection
Hinges to ease with installation and handling
Vents available per customer specifications.
Standard body materials are A106 Gr. C seamless pipe,
A216 Gr. WCC cast steel, and A516 Gr. 70 steel plate.
Standard bolting is A193 Gr. B7 with A194 Gr. 2H nuts.
Patented steel GirderRings prevent displacement &
damage of seals during installation
Some sizes and lengths not listed are available upon request.

Technical Parameters:

image005.jpg

Hot Tags: 10 mpa repair clamp, China, manufacturers, suppliers, factory, low price, buy
Related Products
Inquiry

Copyright © Dalian Zhuhong Mechanical Co.,Ltd All Rights Reserved.