Stainless Steel 316 Tee Clamp

Stainless Steel 316 Tee Clamp

Flange design: Flanges are drilled acc. to DIN 2576 and NEN 1092-1. The flange thickness is 24 mm for flanges up to DN 200 and 26 mm for flanges up to up to DN 300. Standard flanges are flat faced PN 10, but raised faced, ASA and PN 16 flanges are available upon request. Depending on OD and flange size...

Send InquiryChat Now
Product Details

Flange design:
Flanges are drilled acc. to DIN 2576 and NEN 1092-1. The flange thickness is 24 mm for flanges up to DN 200 and 26 mm for flanges up to up to DN 300. Standard flanges are flat faced PN 10, but raised faced, ASA and PN 16 flanges are available upon request.

Depending on OD and flange size the branch can be supported by an additional reinforcement. Pipe and valve should always be supported according to standard codes of practice.
Size on size tapping sleeves require the use of an undersized 
shell cutter. Please ask your distributor for more information.

The sleeve can be used to repair the following pipe types:

  • Ductile Iron (DI)

  • Cast Iron (CI)

  • Steel (St.)

  • Asbestos Cement (AC)

  • PE coated steel

  • PVC*

  • GRP*

  • PE*

* If pipe repair clamps are to be used on plastic pipes, please always contact us for more information regarding the application and restrictions on these pipe types。

image.png

image.png

Hot Tags: stainless steel 316 tee clamp, China, manufacturers, suppliers, factory, low price, buy
Related Products
Inquiry

Copyright © Dalian Zhuhong Mechanical Co.,Ltd All Rights Reserved.