LUGS 304 Stainless Steel, Fused To Sidebars By GMAW Welding
LUGS 304 Stainless Steel, fused to sidebars by GMAW welding
stainless steel repair clamp sealing rubber EPDM or NBR ,viton
material: SS304/ SS316 or galvanized steel sheet
work pressure: PN10/PN16
sealing rubber: EPDM or upon request
Product description: stainless steel repair clamps can be made of SS304/ SS316 or galvanized steel sheet with sealing rubber EPDM or upon request. work pressure can be PN10/ PN16 and size from DN20 to DN1200
SHELL 304 Stainless Steel, 16 to 22 gauge depending on size.
SIDEBARS Heavy gauge 304 Stainless Steel, GTAW welded to form permanent fusion with shell.
LUGS 304 Stainless Steel, fused to sidebars by GMAW welding.
BOLTS 304 Stainless Steel, 4 inch clamps and smaller use 1/2" UNC rolled thread, 6 inch clamps and larger use 5/8" UNC rolled thread. Bolts are GMAW welded to sidebar.
NUTS Heavy hex, 304 Stainless Steel, 4 inch clamps and smaller uses 1/2" UNC threads, 6 inch clamps and larger uses 5/8" UNC thread. Nuts coated to prevent galling.
WASHERS 5/8" 304 Stainless Steel flat washers. SS1's 13.55 and larger, SS2's 13.50 and larger and all SS3's receive Stainless Steel flat washer. 1/2" or 5/8" Plastic washer prevents galling between nut or stainless steel washer and lifter bar, on all sizes.
ARMORS Heavy gauge 304 Stainless Steel, bonded to gasket to bridge gap at lug area.
LIFTER BARS 304 Stainless Steel, lip curved to hold position while tightening. Heavy gauge serves as bearing surface for nuts.
GASKETS Virgin SBR rubber compounded for water and sewer service in accordance with ASTM D 2000 MAA 610