Pipe Repair Clamp

  • Cast Iron Repair Clamp DN100

    Cast Iron Repair Clamp DN100

    Cast Iron Repair Clamp DN 100 Product Features: 1. The flange adaptor is well suitable for the installation of the falnge pipeline, one end connecting the flange plate, the other end connecting spigot socket pipe. Install easily and remove conveniently. 2. With its wide...Read More
  • Casting Parts Repair Fitting DN 300

    Casting Parts Repair Fitting DN 300

    Casting parts Repair fitting DN 300 Main features 1. Drinking water approved EPDM gasket with moulded ribs absorbs minor imperfections in the pipe. 2. WRAS approved row EPOXY powder to ensure products suitable for drinking water supply pipeline. 3. We provide various material...Read More
  • Hot Tapping Saddle

    Hot Tapping Saddle

    Hot Tapping Saddle Product Features: High pressure Pipe Repair Clamp It also can be made according to other special requirements. All the HRC Clamps are tested under 1.5times than design working pressure. The standard material of sealing rubber ring is EPDM and NBR. Other...Read More
  • 400 Bar Repair Clamp

    400 Bar Repair Clamp

    400 Bar Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special...Read More
  • 10 Mpa Repair Clamp

    10 Mpa Repair Clamp

    10 Mpa Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar. It also can be made according to other special...Read More
  • 1500 Psi Repair Clamp

    1500 Psi Repair Clamp

    1500 Psi Repair Clamp Product Features: High pressure Pipe Repair Clamp is designed for the repair of high pressure pipe.The standard working pressure is 64 bar while actual working pressure could reach 100 bar or 140 bar.Standard working pressure is 1000 psig. Fittings are...Read More
  • 900 Psi Repair Clamp

    900 Psi Repair Clamp

    900 Psi Repair Clamp Product Features: 900 Psi Repair Clamp is designed for the repair of high pressure pipe.Cross-section of Split+Sleeve shows location of longitudinal packing and patented steel GirderRings which hold packing securely in place to prevent its displacement...Read More
  • 600 Psi Repair Clamp

    600 Psi Repair Clamp

    600 Psi Repair Clamp Product Features: Standard working pressure is 600 psig, 1000 psig. Fittings are available in longer lengths such as 18", 24" and longer as well as higher working pressures such as 1500 psig or 2000 psig; if higher working pressures or longer...Read More
  • 1200 Psi Repair Clamp

    1200 Psi Repair Clamp

    1200 Psi Repair Clamp Product Features: • Standard Clamps are fitted with a high grade elastomeric seal made from Buna-Nitrole or Viton. In these applications the sealing load is achieved through the bolt tensioning of the clamp studs (split sleeve design) • All Clamps are...Read More
  • 6'' 10 Mpa Repair Clamp

    6'' 10 Mpa Repair Clamp

    6" 10 Mpa Repair Clamp Product Features: The fittings have been used worldwide for pipeline repair and maintenance, in a wide variety of applications, both onshore and offshore. Applications include oil, gas, water, chemical, steam, slurry and other piping systems....Read More
  • 8'' 10 Mpa Repair Clamp

    8'' 10 Mpa Repair Clamp

    8" 10 Mpa Repair Clamp Product Features: Split Sleeves are repair fittings used to permanently seal leaks caused by corrosion. 8" 10 Mpa Repair Clamp, Forged steel High Pressure Repair Clamp is designed for the repair of high pressure pipe. The standard working...Read More
  • 12'' 10 Mpa Repair Clamp

    12'' 10 Mpa Repair Clamp

    12" 10 Mpa Repair Clamp Product Features: These Split Sleeves are used to permanently seal leaks in a marine situation. Forged steel High Pressure Repair Clamp is designed for the repair of high pressure pipe. The standard working pressure is 64 bar while actual working...Read More
We're well-known as one of the leading pipe repair clamp manufacturers and suppliers in China for our quality products and low price. Please feel free to buy quality pipe repair clamp from our factory.

Copyright © Dalian Zhuhong Mechanical Co.,Ltd All Rights Reserved.